Fixing supports for plasterboard

Goman offers articles such as fixing supports, brackets, holders and multi-layer boards which could be used to install wall-hang washbasins, bathroom aids, wall-hang toilets, urinals or shower seats on plasterboard and masonry. We can also provide stirrups used to install folding bars near the toilet bowl.

wall mounted Suspended universal WC Frame for plasterboard

wall mounted Suspended universal WC Frame for plasterboard

Code: STF02/01
Dimensions: Cm
Package weight: Kg 9

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

UNIVERSAL SUPPORT FOR DISTANCE 600 MM. FOR VASE AND BIDET SUSPENDED. COMPONENT PRE GALVANIZED EQUIPPED WITH: UPPER HEAD SLIDING OFFSET FOR HEALTH, VERTICAL PROFILES WITH DOUBLE SLOT AND BASES OF FIXING THE GROUND, BARS M12 ZINC TO DISTANCE OR CM.23 18 cm, 35 cm ADJUSTABLE HEIGHT WITH TOUR, ADJUSTABLE COLLAR FOR CURVE CACCIATA Ø40-Ø50, ADJUSTABLE COLLAR FOR CURVE Ø90-Ø110 DRAIN. PRODUCT IN GALVANIZED STEEL DX51D + Z 275 SECOND EN10346: 2009. GALVANIZED BOLTS ACCORDING TO UNI EN ISO 898-1: 2012 and 898-2: 2012. TYPE: GOMAN ARTICLE STF02 / 01

wall mounted Suspended universal WC Frame for plasterboard

wall mounted Suspended universal WC Frame for plasterboard

Code: STF03/01
Dimensions: Cm
Package weight: Kg 9

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

UNIVERSAL SUPPORT FOR DISTANCE 400 MM. FOR VASE AND BIDET SUSPENDED. COMPONENT PRE GALVANIZED EQUIPPED WITH: UPPER HEAD SLIDING OFFSET FOR HEALTH, VERTICAL PROFILES WITH DOUBLE SLOT AND BASES OF FIXING THE GROUND, BARS M12 ZINC TO DISTANCE OR CM.23 18 cm, 35 cm ADJUSTABLE HEIGHT WITH TOUR, ADJUSTABLE COLLAR FOR CURVE CACCIATA Ø40-Ø50, ADJUSTABLE COLLAR FOR CURVE Ø90-Ø110 DRAIN. PRODUCT IN GALVANIZED STEEL DX51D + Z 275 SECOND EN10346: 2009. GALVANIZED BOLTS ACCORDING TO UNI EN ISO 898-1: 2012 and 898-2: 2012. TYPE: GOMAN ARTICLE STF03 / 01

universal board in wood H30 centre to centre distance 40

universal board in wood H30 centre to centre distance 40

Code: STF10/01
Dimensions: Cm H30
Package weight: Kg 6

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

TABLE PLYWOOD H = MM.300 MM.400 POSTS FOR DISTANCE COMPONENT PRE INSTALLATION OF GENERAL CARGO MAX 150KG. It EQUIPPED WITH: - FIXING FLANGE SIDE SLIDING - TABLE PLYWOOD S = MM. 20 CM. X 30 CM. 33. TO INSTALL ON POSTS-CASE, BY MM. 50-75-100, USING BOLTS SPECIFIC FOR METAL. FLANGES ALLOW ONE SIDE CORRECTION wheelbase POSTS UP TO +/- CM. 2 PLYWOOD POPLAR PRODUCT UNI EN 313-2: 2000 and CE MARKED FOR USE AS A COMPONENT STRUCTURES IN ACCORDANCE WITH UNI EN 13986: 2005. GALVANIZED STEEL DX51D + Z 275 WITH EN 10346: 2009. GALVANIZED BOLTS ACCORDING TO UNI EN ISO 898-1: 2012 (BOLTS AND THREAD BARS) AND 898-2: 2012 (HEX NUTS). TYPE: GOMAN ARTICLE STF10 / 01

universal board in wood H30 centre to centre distance 60

universal board in wood H30 centre to centre distance 60

Code: STF11/01
Dimensions: Cm H30
Package weight: Kg 6

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

TABLE PLYWOOD H = MM.300 MM.600 POSTS FOR DISTANCE COMPONENT PRE INSTALLATION OF GENERAL CARGO MAX 150KG. It EQUIPPED WITH: - FIXING FLANGE SIDE SLIDING - TABLE PLYWOOD S = MM. 20 CM. X 30 CM. 53. TO INSTALL ON POSTS-CASE, BY MM. 50-75-100, USING BOLTS SPECIFIC FOR METAL. FLANGES ALLOW ONE SIDE CORRECTION wheelbase POSTS UP TO +/- CM. 2. PLYWOOD POPLAR PRODUCT UNI EN 313-2: 2000 and CE MARKED FOR USE AS A COMPONENT STRUCTURES IN ACCORDANCE WITH UNI EN 13986: 2005. GALVANIZED STEEL DX51D + Z 275 WITH EN 10346: 2009 ZINC BOLTS ACCORDING TO UNI EN ISO 898-1: 2012 (BOLTS AND THREAD BARS) AND 898-2: 2012 (HEX NUTS). TYPE: GOMAN ARTICLE STF11 / 01

universal board in wood H50 centre to centre distance 40

universal board in wood H50 centre to centre distance 40

Code: STF12/01
Dimensions: Cm H50

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

TABLE IN MULTI-H = 500 MM FOR DISTANCE BETWEEN POSTS MM.400 COMPONENT PRE INSTALLATION OF GENERAL CARGO MAX 150KG. It EQUIPPED WITH: - FIXING FLANGE SIDE SLIDING - TABLE PLYWOOD S = MM. 20 CM. X 30 CM. 33. TO INSTALL ON POSTS-CASE, BY MM. 50-75-100, USING BOLTS SPECIFIC FOR METAL. FLANGES ALLOW ONE SIDE CORRECTION wheelbase POSTS UP TO +/- CM. 2 PLYWOOD POPLAR PRODUCT UNI EN 313-2: 2000 and CE MARKED FOR USE AS A COMPONENT STRUCTURES IN ACCORDANCE WITH UNI EN 13986: 2005. GALVANIZED STEEL DX51D + Z 275 WITH EN 10346: 2009. GALVANIZED BOLTS ACCORDING TO UNI EN ISO 898-1: 2012 (BOLTS AND THREAD BARS) AND 898-2: 2012 (HEX NUTS). TYPE: GOMAN ARTICLE STF12 / 01

universal board in wood H50 centre to centre distance 60

universal board in wood H50 centre to centre distance 60

Code: STF13/01
Dimensions: Cm H50
Package weight: Kg 6

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

TABLE IN MULTI-H = 500 MM 600 MM COMPONENT FOR DISTANCE BETWEEN POSTS PRE INSTALLATION OF GENERAL CARGO MAX 150KG. It EQUIPPED WITH: - FIXING FLANGE SIDE SLIDING - TABLE PLYWOOD S = MM. 20 CM. X 30 CM. 53. TO INSTALL ON POSTS-CASE, BY MM. 50-75-100, USING BOLTS SPECIFIC FOR METAL. FLANGES ALLOW ONE SIDE CORRECTION wheelbase POSTS UP TO +/- CM. 2. PLYWOOD POPLAR PRODUCT UNI EN 313-2: 2000 and CE MARKED FOR USE AS A COMPONENT STRUCTURES IN ACCORDANCE WITH UNI EN 13986: 2005. GALVANIZED STEEL DX51D + Z 275 WITH EN 10346: 2009 ZINC BOLTS ACCORDING TO UNI EN ISO 898-1: 2012 (BOLTS AND THREAD BARS) AND 898-2: 2012 (HEX NUTS). TYPE: GOMAN ARTICLE STF13 / 01

shower seat Frame for plasterboard

shower seat Frame for plasterboard

Code: STF18/01
Dimensions: Cm
Package weight: Kg 7,5

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

SEATS AND SUPPORT BRACKET X811 AN-811 FOR PLASTERBOARD WALLS. COMPONENT PRE GALVANIZED POSTS TO BE INSTALLED ON OR MOLDED REINFORCED MM 75 - 100. ARRANGED FOR DISTANCE MM 600. POSTS TO BE FIXED ON THE BASE RAW OR RESISTANT FLOOR WITH SPECIFIC ANCHORS. SUPPORT RULES UNI8942-2. MOUNT PROPERLY INSTALLED, ALLOWS THE SEAT OF SUPPORT A LOAD OF STATIC KG. ARTICLE 150. GOMAN STF18 / 01

shower seat Frame for plasterboard

shower seat Frame for plasterboard

Code: STF19/01
Dimensions: Cm
Package weight: Kg 8,8

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

SUPPORT SEAT SHOWER (X810 / 01) FOR PLASTERBOARD WALLS. COMPONENT PRE GALVANIZED BASE-CASE telescopic BE INSTALLED ON POSTS OR STRENGTHENED BY MM 75 - MM 600. 100. DISTANCE TO BE FIXED ON THE BASE RAW OR RESISTANT FLOOR WITH SPECIFIC ANCHORS. M6 ZINC BAR FOR FIXING FLANGE SEAT (MAKING POSITION WITH BAR TO MEASURE). EXCURSION TELESCOPIC CM 20. STRUCTURE THICKNESS MM MAX 45. THE SUPPORT order properly INSTALLED, ALLOWS YOU TO SUPPORT A STATIC LOAD OF 150 KG. TYPE: GOMAN ARTICLE STF19 / 01

wall mounted Washbasin Frame for plasterboard

wall mounted Washbasin Frame for plasterboard

Code: STF21/01
Dimensions: Cm
Package weight: Kg 9,1

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

UNIVERSAL SUPPORT FOR BOWLS. COMPONENT PRE GALVANIZED. POSTS TO BE INSTALLED ON OR MOLDED REINFORCED WITH GUIDE OR LISTONE, MM. 50-75-100. READY FOR DISTANCE BETWEEN POSTS MM 600. FLANGE SIDE REVERSIBLE FIXING FOR USE ON DISTANCE MM 400, M12 ZINC BAR ADJUSTABLE. CORRECTING HEIGHT BAR EVEN WALL OVER. DISTANCE BAR 28 CM ADJUSTABLE. UNIVERSAL COLLAR EXHAUST BEND Ø40-Ø50. CONNECTIONS BRASS 1/2 "MF ADJUSTABLE. M12 NUT, WASHER, AND BUSHES CAPS FOR INSTALLATION SINK OR OPEN FORMAT. FLANGE FOR ADDITIONAL MOUNTING BRACKETS GOMAN: D0136 / 01, D0131 / 01, D0134 / D0133 01/01. FLOW RATE sINK WITHOUT COLUMN kg.150. TYPE: GOMAN ARTICLE STF21 / 01

SHOWER SEAT FRAME FOR PLASTERBOARD

SHOWER SEAT FRAME FOR PLASTERBOARD

Code: STF17/01
Dimensions: Cm

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

SUPPORT SEAT SHOWER (X812 / 01) FOR PLASTERBOARD WALLS. COMPONENT PRE GALVANIZED BASE-CASE telescopic BE INSTALLED ON POSTS OR STRENGTHENED BY MM 75 - MM 600. 100. DISTANCE TO BE FIXED ON THE BASE RAW OR RESISTANT FLOOR WITH SPECIFIC ANCHORS. M6 ZINC BAR FOR FIXING FLANGE SEAT (MAKING POSITION WITH BAR TO MEASURE). EXCURSION TELESCOPIC CM 20. STRUCTURE THICKNESS MM MAX 45. THE SUPPORT order properly INSTALLED, ALLOWS YOU TO SUPPORT A STATIC LOAD OF 150 KG. TYPE: GOMAN ARTICLE STF17 / 01

BRACKET FOR WC MONOBLOC SUSPENDED FOR PLASTERBOARD WALLS

BRACKET FOR WC MONOBLOC SUSPENDED FOR PLASTERBOARD WALLS

Code: STF01/01
Dimensions: Cm 60X74 CM.
Package weight: Kg 9

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

COUPLED SUSPENDED FOR PLASTERBOARD WALLS. COMPONENT PRE GALVANIZED. POSTS TO BE INSTALLED ON OR MOLDED REINFORCED BY MM. 75-100. MM 600. DISTANCE TO BE FIXED ON THE BASE RAW OR RESISTANT FLOOR WITH SPECIFIC ANCHORS. M12 ZINC BAR ADJUSTABLE DISTANCE MM. 290. COLLAR UNIVERSAL CURVE Ø90-Ø110 DRAIN. M12 NUTS, WASHERS, BUSHES CAPS AND INSTALLATION FOR HEALTH. SUPPORT A UNI 8949/2. SPECIFIC ITEMS GOMAN: D0468 / 01, D0471 / 01, D0469 / D0472 01/01. TYPE: GOMAN ARTICLE STF01 / 01

BRACKET FOR SUSPENDED WC AND R/L FOLDING BAR FOR PLASTERBOARD WALLS

BRACKET FOR SUSPENDED WC AND R/L FOLDING BAR FOR PLASTERBOARD WALLS

Code: STF23/01
Dimensions: Cm ---
Package weight: Kg 18

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

SUPPORT FOR WC SUSPENDED AND BAR FOLDING RIGHT / LEFT FOR PLASTERBOARD WALLS FOR D056A / 01, D057A / 01, D058A / 01 D0182C / 01.COMPONENTE PRE GALVANIZED. POSTS TO BE INSTALLED ON OR MOLDED REINFORCED MM 75-100. MM 950. DISTANCE TO BE FIXED ON THE BASE RAW OR RESISTANT FLOOR WITH SPECIFIC ANCHORS. M12 ZINC BAR ADJUSTABLE WHEELBASE CM 18. BARRE M8 GALVANIZED ADJUSTABLE DISTANCE COLLAR CM 40. UNIVERSAL BEND DRAIN Ø90 - Ø110. M12 NUTS, WASHERS, BUSHES CAPS AND INSTALLATION FOR HEALTH. SUPPORT A UNI 8949/2. TYPE: GOMAN ARTICLE STF23 / 01

BRACKET FOR SUSPENDED MONOBLOC WC AND R/L FOLDING BAR FOR PLASTERBOARD WALLS

BRACKET FOR SUSPENDED MONOBLOC WC AND R/L FOLDING BAR FOR PLASTERBOARD WALLS

Code: STF24/01
Dimensions: Cm ---
Package weight: Kg 18

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

SUPPORT FOR WC SUSPENDED AND BAR FOLDING RIGHT / LEFT FOR PLASTERBOARD WALLS FOR D0471 / 01, D0472 / 01, D0468 / D0469 01/01. COMPONENT PRE GALVANIZED. POSTS TO BE INSTALLED ON OR MOLDED REINFORCED MM 75-100. MM 950. DISTANCE TO BE FIXED ON THE BASE RAW OR RESISTANT FLOOR WITH ANCHORS SPECIFICI.BARRE M12 GALVANIZED ADJUSTABLE WHEELBASE CM 29. BARRE M8 GALVANIZED ADJUSTABLE DISTANCE COLLAR CM 40. UNIVERSAL BEND DRAIN Ø90 - Ø110. M12 NUTS, WASHERS, BUSHES CAPS AND INSTALLATION FOR HEALTH. SUPPORT A UNI 8949/2. TYPE: GOMAN ARTICLE STF24 / 01

BRACKET FOR SUSPENDED WC AND R/L FOLDING BAR AND UNIVERSAL WC-FLUSHING TANK FOR PLASTERBOARD WALLS

BRACKET FOR SUSPENDED WC AND R/L FOLDING BAR AND UNIVERSAL WC-FLUSHING TANK FOR PLASTERBOARD WALLS

Code: STF26/01
Dimensions: Cm ---

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

SUPPORT GALVANIZED FOR WC SUSPENDED 2 ATTACKS WITH ADJUSTABLE DISTANCE BARS TO CM 18. FULL SUPPORT BAR AND SUPPORT BUILT-IN BOX, WITH BASES OF STRENGTHENING THE FLOOR AND UNIVERSAL COLLAR FOR DISCHARGE CURVE. M12 NUT, WASHER, AND BUSHES CAPS INSTALLATION FOR HEALTH. SUPPORT RULES UNI8949 / 2 SUPPORT SPECIFICALLY FOR VESSELS SERIES SUSPENDED OPEN ARTICLE D056A / 01, D057A / 01, D058A / E D0182C 01/01 AND BAR ZB12 / 01 ZB12P / 01, ZB13 / ZB14 01/01. TYPE: GOMAN ARTICLE STF26 / 01

BRACKET FOR SUSPENDED MONOBLOC WC AND R/L FOLDING BAR AND UNIVERSAL WC-FLUSHING TANK FOR PLASTERBOARD WALLS

BRACKET FOR SUSPENDED MONOBLOC WC AND R/L FOLDING BAR AND UNIVERSAL WC-FLUSHING TANK FOR PLASTERBOARD WALLS

Code: STF27/01
Dimensions: Cm ---

SPECIFICATIONS

REQUEST INFO Request information

SPECIFICATIONS

SUPPORT GALVANIZED FOR WC SUSPENDED 4 ATTACKS WITH ADJUSTABLE DISTANCE BARS TO CM 29. FULL SUPPORT BAR AND SUPPORT BUILT-IN BOX, WITH BASES OF STRENGTHENING THE FLOOR AND UNIVERSAL COLLAR FOR DISCHARGE CURVE. M12 NUT, WASHER, AND BUSHES CAPS INSTALLATION FOR HEALTH. SUPPORT RULES UNI8949 / 2 SUPPORT SPECIFICALLY FOR VESSELS SERIES SUSPENDED OPEN ARTICLE D0471 / 01, D0472 / 01, D0468 / D0469 01/01 AND BAR ZB12 / 01 ZB12P / 01, ZB13 / ZB14 01/01. TYPE: GOMAN ARTICLE STF27 / 01

Product Category

Goman S.r.l

WRITE USCALL US